Instructions

UM-0085-B09 DT80 Range User Manual Page 160

Customising the Web Interface

Overview

Several aspects of the enhanced web interface can be customised to suit site requirements:

• Selected menu items can be disabled to help prevent unauthorised or accidental changes to the logger

configuration. For example, access to the Command window can be removed.

• Up to 20 mimic screens can be defined, each with up to 16 mimics.

• Help pages can be customised to provide site specific information, OEM details, etc

• Users can be prevented from adding or editing mimics

The Web Interface Configuration Tool

To run the Web Interface Configuration Tool, select Customise dEX on the Logger home page (Figure 22). This will

display a pop-up window, similar to that shown below.

Figure 53: Customising Status page

The configuration tool is laid out in a similar way to the web interface itself. There is a menu of options down the left hand

side which allow you to switch between different categories of settings. The pane on the right displays settings related to

the selected category.

The Save settings button at the lower right will save all settings to the logger. This only needs to be done once; it is not

necessary to save the settings for each category separately. After pressing the Save button, you should see a

confirmation message pop up after a few seconds.

The X symbol at the top right will close the configuration tool and return to the Logger home page. Any changes made

since you last pressed Save settings will be discarded.

Finally, the Restore defaults button at bottom left will reset all settings to factory defaults, and save them to the logger.