Instructions
UM-0085-B09  DT80 Range User Manual  Page 400 
RG 
  Error Number – Description 
•  Cause/Action 
Error Category 
Syntax  Operation  Memory  Reading  Hardware 
  E127 - Modbus IP address specified on serial 
  channel 
 
  E128 - Modbus serial address specified on 
  TCP/IP channel 
•  or no address specified 
 
  E129 – Modbus - unexpected format of response 
  packet 
 
  E130 - Modbus - unexpected function id in 
  response 
 
  E131 - Modbus - exception response received 
•  Slave device does not support the requests used by the 
DT80. 
 
  E132 - Modbus - error in definition of CV 
  block to send 
•  invalid CV indEX 
 
  E133 - Modbus - reading values to CVs 
  prevents writing 
•  MODBUS channel cannot write values from CVs and 
also assign to CVs 
 
  E134 - Modbus - 32 bit format not applicable 
  to discrete transfer 
•  MBL, MBF options are not applicable when reading 1-
bit registers (coils/discrete inputs) 
 
  E135 - Modbus - volume of data to transfer 
  exceeds Modbus message capacity 
•  limit is 123 16-bit registers or 1968 1=bit registers 
 
  E137 – Unresolved host name: name 
•  host name may be misspelled 
•  check that DNS server is functional 
 
  E142 – Modem command failed 
•  MODEM command failed, possibly because the 
required prerequisites were not satisfied e.g. PIN not 
entered 
 
  E143 – Modem busy 
•  MODEM command failed due to the modem being 
busy, e.g. firmware upgrade in progress 
 
  E148-152 – Time trigger – detailed msg 
•  Time of day schedule trigger syntax error 
 
  E153 – Create user – detailed msg 
•  User account cannot be created as the username 
already exists 
 
  E154 – Create user – detailed msg 
•  User account cannot be created as the username 
already exists 
 
  E153 – No such user – detailed msg 
•  User account does not exist 
 
  E155 – Delete user – detailed msg 
•  Cannot delete logged in user account 
 
  E156 – User not authorised – detailed msg 
•  Not authorised to perform action 
 
  E157 – User not authenticated – detailed msg 
•  User cannot be authenticated 
 
  E158 – Another user logged in – 
detailed msg 
•  Another user session is active. 
•  Only one session in time is supported 
 
  E159 – Invalid username – detailed msg 
•  The username is invalid 










