Instructions
UM-0085-B09  DT80 Range User Manual  Page 268 
RG 
Section Name 
Key Name 
Legal Values 
Factory Default 
Comment 
WIFI 
COEX_MODE  WLAN 
WLAN 
Selects WIFI module operation mode 
defining protocol stacks loaded. 
Currently, only WLAN mode is 
supported. 
SECURITY_MODE 
OPEN, 
PSK_WEP, 
PSK_WPA, 
PSK_WPA2 
PSK_WPA2 
Defines security mode being used by 
logger’s WIFI interface. 
PSK 
string 
DATATAKER 
Pre-Shared Key Secret 
SSID 
string 
DT80S4-AP 
WIFI Service Set Identifier (SSID). 
HIDDEN_SSID  YES,NO 
NO 
Enables hiding SSID during network 
scan for Access Point Mode. 
IP_ADDRESS 
IP ADDRESS, 
AUTO 
AUTO 
IP Address for the WIFI Interface in 
Client mode. When AUTO selected IP 
Address and subsequent parameters 
will be retrieved via DHCP. 
GATEWAY 
IP ADDRESS 
192.168.0.1 
IP Address of the Gateway 
SUBNET_MASK  IP ADDRESS 
255.255.255.0 
Subnet mask for the interface IP 
Endpoint 
METRIC 
decimal 
30 
WIFI Interface Metric 
DNS_SERVER1 
IP ADDRESS 
NONE 
Primary DNS Server Address 
DNS_SERVER2 
IP ADDRESS 
NONE 
Secondary DNS Server Address 
WLAN_AGGREGATION  YES,NO 
NO 
Enable WLAN Aggregation for the WIFI 
Interface 
ANTENNA_SELECT  INT,EXT 
EXT 
Select what antenna to use on WIFI 
Module: Internal or External. 
FREQ_BAND 
2_4GHZ, 
5GHZ, 
DUAL_BAND 
2_4GHZ 
Select frequency bands being used by 
WIFI Module: 2.4Ghz, 5GHz, and Dual 
Band (2.4GHz and 5GHz 
simultaneously). Availability of particular 
bands depend on the module being 
used in the unit. 
ENCRYPT_MODE  NONE,TKIP,CCMP 
CCMP 
Defines encryption algorithm:  
None – no encryption; 
TKIP – Temporal Key Integrity Protocol; 
CCMP – Counter Mode Cipher Block 
AP_CHAN_NO  0-165 
1 
Access Point Channel Number defines 
a channel being used in the Access 
Point Mode by the module. 
BEACON_INTERVAL 
100-1000 
100 
Beacon Interval for WIFI Interface 
DTIM_PERIOD  1-255 
1 
Delivery Traffic Indication Message 
(DTIM) Interval 
MAX_STA_SUPPORT  0-4 
4 
Maximum number of client stations 
supported by the module configured in 
the Access Point Mode. 
DHCP_SRV_ENABLE  YES,NO 
YES 
Enable DHCP Server for the interface in 
Access Point Mode. 
DHCP_RANGE_START_IP  IP ADDRESS 
192.168.0.2 
DHCP Server leasing range start 
address 
DHCP_RANGE_END_IP  IP ADDRESS 
192.168.0.50 
DHCP Server leasing range end 
address 
DHCP_LEASE_TIME  10-4294967293 
86400 
IP Address leasing time by DHCP 
Server in seconds 
SMTP_SERVER 
string
NONE 
SMTP Server Name 
SMTP_ACCOUNT 
string 
NONE 
SMTP Account Name 
SMTP_PASSWORD 
string 
NONE 
SMTP Account Password 
SMTP_PORT 
0-65535 
25 
SMTP Port Number 
RETURN_ADDRESS 
string 
Your.Logger@dat
ataker.com 
Return address will be specified in the 
outgoing e-mail messages sent by the 
logger 
SENDER_NAME 
string 
NONE 
Sender Name will be specified in the 
outgoing e-mail messages 
RETRY_DELAY_S  10-86400 
30 
Retry delay for unsuccessful message 
sending attempt 
Table 9: DT80 PROFILE Details 










