User manual

Datasheen D902AW User Manual
Page 4 Total 19 Pages
2 SPECIFICATION
2.1 INTERFACE INTRODUCTION
2.1.1 INDICATOR AND INTERFACE
Table 2.1
ITEM Name State introduction
Indicator
POWER A steady red light means the power connection works properly
DSL Yellow, shows DSL line status.
INTERNET Green, Flashing means the Modem is transmitting or receiving data
LAN Green, Indicates status of connection to the PC network card
WIRELESS Green, Indicates status of connection to the wireless device
Interface
LINE Connected with phone line or “ADSL” port of the splitter.
ETHERNET
To be connected to a PC network card by a straight-through network cable, also
can use a crossover cable to connect to Hub, Switch or Router.
SWITCH Power interface, Connect with power adapter.
POWER To turn on / off the power.
RST
Press the reset button and turn on the power, then keep pressing the reset button for
5 seconds. Then you can reset the modem with the default settings.
2.1.2 SPLITTER SPEC
Table 2.2
Interface Introduction
LINE Connected with telephone line
ADSL
Connect with the LINE port of the
ADSL Modem using telephone
line provided.
PHONE Connect with telephone