User manual

Datasheen D902AS User Manual
Page 4 Total 16 Pages
2 SPECIFICATION
2.1 INTERFACE INTRODUCTION
2.1.1 INDICATOR AND INTERFACE
Table 2.1
ITEM Name State introduction
Indicator
POWER A steady red light means the power connection works properly
LINK Yellow, shows DSL line status.
DATA
Green, Flashing means the Modem is transmitting or receiving
data
PC Green, Indicates status of connection to the PC network card
Interface
LINE
Connected with phone line or “ADSL” port of the splitter。
ETHERNET
To be connected to a PC network card by a straight-through
network cable, also can use a crossover cable to connect to Hub,
Switch or Router.
POWER Power interface, Connect with power adapter.
RST
Reset to default setting.
Put a pin into the eyelet, and press the button hidden in the
modem, then you can reset the modem with the default value.
SWITCH To turn on / off the power.
2.1.2 SPLITTER SPEC
Table 2.2
Interface Introduction
LINE Connected with telephone line
ADSL
Connect with the LINE port of the
ADSL Modem using telephone
line provided.
PHONE Connect with telephone
2.2 HARDWARE CONNECTION
Figure 2.1