User manual

Datasheen D902AC User Manual
Page 4 Total 25 Pages
2 SPECIFICATION
2.1 INTERFACE INTRODUCTION
2.1.1 INDICATOR AND INTERFACE
Table 2.1
ITEM Name State introduction
Indicator
POWER A steady red light means the power connection works properly
LINK Yellow, shows DSL line status.
DATA
Green, Flashing means the Modem is transmitting or receiving
data
PC Three color, Indicates status of connection to the PC
Interface
LINE Connected with phone line or “ADSL” port of the splitter.
ETHERNET
To be connected to a PC network card by a straight-through
network cable, also can use a crossover cable to connect to Hub,
Switch or Router.
USB To be connected to a PC USB interface by a USB line.
POWER Power interface, Connect with power adapter.
RST
Reset to default setting.
Press the reset button and turn on the power, then keep pressing
the reset button for 5 seconds. Then you can reset the modem
with the default settings.
SWITCH To turn on / off the power.
2.1.2 SPLITTER SPEC
Table 2.2
Interface Introduction
LINE Connected with telephone line
ADSL
Connect with the LINE port of the
ADSL Modem using telephone
line provided.
PHONE Connect with telephone
2.2 HARDWARE CONNECTION
Figure 2.1