Setup guide

Dirac Theater Setup Guide Version 1.01
Document # 9301H40300V1.01
20
Downloading the filters to the AP20 will enable the newly computed filters in the sound chain.
Figure 19. Export Screen
After the Dirac Live filters have been downloaded, it is possible to perform an optional gain and
delay calibration of the optimized speakers.
2. Put the microphone in a central listening position where the distances and the levels of each
speaker are desired to be equal.
3. Then press Start recording. See Figure 20.
It is also possible to manually adjust the suggested delay and gain.
4. Finally, press Download button again to update the AP20 with the desired gains and delays.
Figure 20. Export Screen
Click the Download button to download
the Dirac Live filters to the AP20.
Check to perform optional delay and gain
calibration of the optimized speakers.