Setup guide

Dirac Theater Setup Guide Version 1.01
Document # 9301H40300V1.01
16
Figure 15. Optimize System Screen
The target curve and cross-over settings are all done on one channel at a time. Make sure you are
satisfied with the target response on each channel.
3. (Optionally) Copy the target and/or cross-over settings from one channel to another (or to
multiple channels) by clicking the Copy target/xover button. See Figure 16.
A dialog box displays, where you can select to copy the target and/or the cross-over from the
currently selected channel to any number of other channels.
Click Edit Target. Then click on a point
(on the red plot) and drag it to a new
location.
Adjust the cross-over settings and
enable/disable the cross-overs as
desired.