Setup guide

Dirac Theater Setup Guide Version 1.01
Document # 9301H40300V1.01
8
2. Select the soundcard input that the microphone is connected to. See Figure 6.
Be sure to select USB Preamp ASIO driver (if you have more than one ASIO driver installed
on your computer) and be sure to declare which input channel your measurement microphone
is plugged into.
Figure 6. Soundcard Setup Screen
The microphone input marked ‘MIC 1’ on the USB Preamp hardware shows as ‘IN 0 – USBPre’ in
the Dirac Live
®
software, and the microphone input marked ‘MIC 2’ on the hardware is shown as
‘IN 1 – USBPre’ in the software.
Select the ASIO driver for the USB Preamp.
Select which soundcard input
the microphone is connected to.