Specifications

RS20i Installation and Operating Guide Page 79
RS20i Installation & Operating Guide Document # 9301H52900 Ver. 1.01
Speaker Configuration
 5.1 – When playing 6.1 audio the back surround channel information will be mixed into the
left surround and right surround channels.
 7.1 – When playing 6.1 audio the back surround channel information is placed on both
back surround channels: 7 and 8. When playing 5.1 audio, the back surround channels are
silent.
Apply LFE +10dB Options
Removes the +10dB LFE (sub woofer) boost applied to the LFE channels when playing DTS
decoded audio. This option may be required for older DTS audio discs.
DTS Neo:6 Option
 Off
 Music – Neo:6 Music keeps the front left and right channels intact while synthesizing the
center and surround channels from the 2-channel source.
 Cinema – Neo:6 Cinema creates 6.1-channels, from 2-channel movie sources, by removing
in-phase information from the Left/Right signals and using it to create the center channel;
and extracting out-of-phase information which is sent to the surround channels.
Misc Options
 Direct Mode – Processing is disabled.
 Disable Surround Remap – When enabled, this option will not remap the playback of 5.1
content to 7.1 speaker configuration.
4.3.7 EQ Setup
Setup (System) > Inputs > Audio EQ Setup
Figure 56. Audio EQ Setup Screen