Specifications

RS20i Installation and Operating Guide Page 61
RS20i Installation & Operating Guide Document # 9301H52900 Ver. 1.01
4.2.3.1 Passwords
By creating passwords, you can control user access to certain functions of the RS20i.
The Netcmd password is the password used to control access to operator-level commands
from a remote network device (i.e. automation device, server) or theater management
system.
A Setup password will restrict users from access to the System Setup menu. A user without
the correct password will not be able to make any changes to the system, inputs, network, or
automation. This password will not block access to the Home Screen items, if using VNC,
but will block access to the “Setup” button
The setup password needs to be entered only once when entering the setup menus and
remains in effect until:
o the RS20i is powered cycled
o one hour passes with no activity
o the ReLock Setup button is pushed.
If the password is lost and you cannot access the RS20i, contact Datasat Digital
Entertainment technical support.
Password restrictions take place as soon as the password is configured in the Access Control
screen.
Passwords are case sensitive. You can enter upper case characters by using the shift button
on the virtual keyboard displayed on the LCD. To remove password protection, clear the
password by pressing the Clear button, then enter a hyphen “-“ and press “OK”.
Note: When removing password protection, if no hyphen is entered (blank selection), the
RS20i will continue to ask for a password to enter the setup menus. In that case select the OK
button to enter the setup menus without entering a password.
Figure 35. NetCmd Virtual Keyboard
Use the hyphen - key
to remove password
protection.