Specifications

RS20i Installation and Operating Guide Page 50
RS20i Installation & Operating Guide Document # 9301H52900 Ver. 1.01
3.0 How-To Procedures for Setup
This table provides a list of setup activities and provides instructions or a link to instructions elsewhere
in this manual.
Table 10. Setup Procedures
ACTIVITY INSTRUCTIONS
Assign an Input button See 4.3.4 Assign Input Buttons, page 67.
Unassign / delete an Input
button
See 4.3.4 Assign Input Buttons, page 67 – select the button and
assign a “blank” input to it.
Configure power-on Input
(Startup Input)
See 4.3.2 Startup Input, page 66.
Create an Input See 3.1 Example: Creating an Input, below.
For detailed information about Inputs, see 2.7 About Inputs, page
33.
Assign Channel Names and VU
meters
See 4.3.8.3 Channel Names, page 87.
Set Stereo Level and Stereo
Routing
See 4.3.6.3 Stereo Level and Routing, page 73.
USB Save / Restore / Load See 4.2.2 Saving and Restoring Configuration Files, page 59.
Load a personalized screen
saver
See 4.2.2 Saving and Restoring Configuration Files, page 59. To
set screensaver time and mode, see 4.2 System Setup Screen,
page 56.
Set up Global Audio Delay for
an input
See 4.3.6.1 Global Delay, page 71.
Set up Multiple Surround
Channels
For digital cinema input, see 4.3.6.2 Extended Surround Options,
page 73.
Set up HDMI option For digital cinema input, see HDMI Options, page 77
View RS20i System information See 4.2.5 System Info, page 63.
Update RS20i software See 4.2.1 Updating Your RS20i Software, page 57.
3.1 Example: Creating an Input
Prior to creating an input, it is necessary to identify the following:
 Input source
 Input option
 EQ set up
 Output preset name
The following example describes how to create “stereo 2” input, with stereo input, global delay of 0 ms,
assignment of EQ and output preset.
1. Open the Input Setup screen by selecting “Inputs”.