Specifications

RS20i Installation and Operating Guide Page 44
RS20i Installation & Operating Guide Document # 9301H52900 Ver. 1.01
to slow.
Use an RTA to calibrate the proper level setting of the subwoofer.
Table 9: SPL levels
Channel Description SPL
1 Left 85 dB
2 Right 85 dB
3 Center 85 dB
4 Sub Woofer 82 dB*
5 Left Surround 82 dB
6 Right Surround 82 dB
7 Rear Surround
Left
82 dB
8 Rear Surround
Right
85 dB
 If not possible to achieve the baseline, use the RS20i (Analog Output Levels) to make
minor adjustments.
2.10.2 Set the EQ
If using Dirac Live, please refer to the Dirac Live Theater Setup manual. For an overview, see 4Using
Dirac Live to Tune the Theater, page
449.
The RS20i contains a full suite of 1/3 Octave EQ filters that are “traditional” cinema processor filters. If
using RS20i 1/3 Octave EQ, complete the following steps.
Setup (System) > Inputs > Audio EQ Setup > Third Octave EQ
Figure 24. Third Octave EQ Screen