Specifications

RS20i Installation and Operating Guide Page 41
RS20i Installation & Operating Guide Document # 9301H52900 Ver. 1.01
 Copy (Copies the entire text field into memory)
 Paste (Clears text field and replaces with text from memory)
 <- (Move text cursor one character to the left)
 -> (Move text cursor one character to the right)
 Cancel (exit the keyboard without saving)
 OK (save entry and exit)
The factory default channel configuration for the RS20i is 8 channels.
Table 8: Default Channel Configuration
Channel Default 6-channel names Default 8-channel names
1 L L
2 R R
3 C C
4 SW SW
5 Ls Ls
6 Rs Rs
7 - Rsl
8 - Rsr
9 -
10 -
11 -
12 -
13 -
14 -
15 -
16 -
2.9.5 Hearing Impaired Output
The first 3 input channels (L,R, and C) are mixed to create the Hearing Impaired output channel. The
hearing impaired mix is 50% Center channel, 25% Left and 25% Right channels.
2.9.6 Verify Channel Assignments in Theater
On the RS20i, select a channel and turn on Pink Noise. In the theater, verify that the Pink Noise output
is coming from the correct loudspeaker(s). Do this for all channels. For details, see Audio Levels, page
104.
Setup (System) > Inputs > Audio Levels
 Select a channel.
 Turn on Pink Noise.
 In theater, listen to confirm audio is coming from correct speaker(s).
 Repeat for all channels.