Specifications

RS20i Installation and Operating Guide Page 27
RS20i Installation & Operating Guide Document # 9301H52900 Ver. 1.01
Completed Task Description Refer to:

Remove feet from RS20i (if needed for
rack clearance)
Installing/Removing Feet, page 31
CONNECT CABLING:

Power Cable

Audio input cables to RS20i (Depends on audio sources)

Audio output cable from RS20i Analog
Out to Audio Power Amps
Appendix B, Interface Wiring Diagrams.

Automation cabling Appendix B, Interface Wiring Diagrams.
ADJUST AND TEST

Theater Equipment Check Check speakers, amplifiers, theater
conditions
3Theater Equipment Check, page 339

Assign channels On RS20i: Setup (System) > Inputs >
Output Preset > Channel Names
3Assign Channels on RS20i, page 339

Verify channel assignments Listen in theater
3Verify Channel Assignments in Theater,
page
341

Set levels to establish a baseline 3Set levels to establish a baseline, page
343

Set the EQ 3Set the EQ, page 344

Set Subwoofer Parametric EQ 3Subwoofer EQ – Parametric EQ, page
347

Final Adjustments (fine tuning) 3Final Adjustments, page 348

Verify Sound Performance Listen in theater

Set up macros for automation 3Macros, page 117311
SYSTEM SECURITY

Save RS20i configuration to USB flash
drive
3Saving and Restoring Configuration
Files, page
459

Set Password to Prevent Unauthorized
Access, if Appropriate.
4Access Control, page 460

Enter Installer name and other data
(optional)
4Access Control, page 460