Specifications

RS20i Installation and Operating Guide Page 19
RS20i Installation & Operating Guide Document # 9301H52900 Ver. 1.01
1.4.1 Adjusting the Volume control
Adjust the volume control by using the knob on the front panel. A volume level from -70 dB to 0 dB
may be selected. The selected volume level is displayed in the upper right corner of the Home screen.
To mute the volume control, touch the Mute button. The button text will turn red.
Unmute the RS20i by touching the mute button again, changing input level, or changing inputs. If in the
Home Screen, increasing the volume control using the knob will also unmute.
Figure 6. Volume Control Muted
1.4.2 External monitor Volume
When an external powered speaker is connected to the RS20i, the level can be controlled using the
monitor volume. To adjust the external monitor volume, touch the Monitor button. The screen shown
in
2Figure 7 will appear. Touch the + or – buttons to raise or lower the volume.
 Touch the Mute button to mute/un-mute the external monitor.
 Touch the Mix button to select a channel and adjust the volume from 0 to 10. See Figure 8,
below.
 Touching
the Close button
will close this screen. The Monitor Volume window will close if
not used within 30 seconds.
Volume Level
Mute