Specifications

RS20i Installation and Operating Guide Page 107
RS20i Installation & Operating Guide Document # 9301H52900 Ver. 1.01
rwCommunity: This is the access code for SNMP write messages.
4.4.2 Network Connection Setup Procedure
1. What type of network are you connecting to?
Dynamically Assigned IP Address (DHCP)
DHCP means that when the RS20i is connected to the network, an IP Address is automatically
assigned to it.
The boxes for IP Address, Mask, Broadcast Addr, Gateway and DNS Server 1 are filled in.
Note that the network cable must be connected before the RS20i is powered on, or power
cycle the RS20i after connecting the network cable.
Note the ‘Link Up’ box when the network cable is connected correctly.
Static (Fixed) IP Address
The installer must assign the IP Address, Mask, Broadcast Addr, Gateway and DNS Server 1.
Contact the network administrator for these settings or see the notes below to define them yourself.
Note that the network cable must be connected before the RS20i is powered on, or power
cycle the RS20i after connecting the network cable.
Note the ‘Link Up’ box when the network cable is connected correctly.