Datasheet

DTM63356G

4 GB - 240-Pin Registered DDR2 DIMM ECC with CMD/ADD Parity

TBD -

17 SDRAM Device Attributes - Number of Banks on SDRAM Device 8 08

SDRAM Device Attributes: CAS Latency 38

TBD -

Latency = 2 -

Latency = 3 - X

Latency = 4 - X

Latency = 5 - X

Latency = 6 -

TBD -

19 DIMM Mechanical Characteristics. Max. module thickness. (mm) x ≤ 4.10 01

DIMM type information 01

Regular RDIMM (133.35mm) - X

Regular UDIMM (133.35mm) -

SODIMM (67.6mm) -

Micro-DIMM (45.5mm) -

Mini RDIMM (82.0mm) -

Mini UDIMM (82.0mm) -

TBD -

SDRAM Module Attributes (Refer to Byte20 for DIMM type information). 05

Number of active registers on the DIMM (N/A for UDIMM) - 2

Number of PLLs on the DIMM (N/A for UDIMM) -

FET Switch External Enable - No

TBD -

Analysis probe installed - No

TBD -

SDRAM Device Attributes: General 03

Includes Weak Driver - X

Supports 50 ohm ODT - X

Supports PASR (Partial Array Self Refresh) -

TBD -

23 Minimum Clock Cycle Time at Reduced CAS Latency, CL = X-1 (ns) 3.75 3D

24 Maximum Data Access Time (tAC) from Clock at CL = X- 1 (ns) 0.50 50