User manual

AP 230 USER MANUAL 35
When the air jet strength adjustment is
completed, proceed with direction setting of
the nozzle by turning right/left wise with an 8
mm wrench to direct the air jet to the required
direction, as indicated on picture 29 on your
left.
To verify if the adjustment is right completed, press button "FEED" on the front panel
of the printer, to eject a new label in order to check if it is correctly spread on the plate.
11.4 - APPLICATION DISTANCE ADJUSTMENT
This regulation directly affects the application accuracy.
To obtain the highest application accuracy (± 1mm), the applicator has to be
mounted on the labelling line so that the distance between the plate and the object
to be labelled is in the range of 10 - 40 mm.
Eventually, in case of side labelling, 90° rotation of the system, and the objects to
be labelled have a regular shape and driven so that they can move sidewise on the
transport line, the can be mounted near the object to be labelled. In this way the plate
will reach the application postion in few millimeter (generally 2mm) from the object.
WARNING: This operation has to be executed by trained personnel and/or
maintenance staff, that has to follow carefully the "SAFETY
MODE FOR THE MAINTENANCE" before working on the machine.
PICTURE 29 - AIR JET STRNGTH DIRECTION
ADJUSTMENT.