User manual

AP 230 USER MANUAL 17
Place the printer in its upright position and
insert the first flange with the smooth side
inward the printer, as indicated on picture 10
on your left.
The flange adjustment on the roll holder unit is
described at paragraph 9.
If the machine mainly works with a 90° rotation,
also mount the plexiglass disk (available as
optional), on the flange and fasten it with the
two countersunk screws supplied with the
disk, as indicated on picture 10 on your left.
PICTURE 10 - PAPER GUIDE FLANGE
PICTURE 11 - PLEXIGLASS DISK