User manual

AP 230 USER MANUAL 11
Save the packaging units and the non-impact material, to be used in case of
returning the AP 230 system or for internal movement about the factories.
Inspect the pakaging to ensure that no damage incurred during transport, and
particularly:
- Check the external parts of the device.
- Open the cover port of the printer to verify possible internal damages.
- Check the damages on applying assembly.
- Verify that the label containing CE mark on the side
of the pneumatic applicator assembly is located on
the position indicated on the picture on your left.
In case of damage:
- Notify the carrier directly, giving details about the
damages.
- Keep the whole packaging unit available for the
carrier inspection.
- Notify by writing the carrier and send copy to "DATAPROCESS INDUSTRIA
S.p.A" or its distributor, indicating the amount of the damages.
WARNING: DATAPROCESS INDUSTRIA SPA is not
responsable for dameges incurred during
transport and is not authorized to replace or
repair under warranty.
CE MARK