Specifications

DATAPROCESS EUROPE S.p.A.
ST3xx ST4xx ST5xx
– PROGRAMMING MANUAL -
Pag.33
h
horizontal expansion factor (values: from 1 to 9);
v
vertical expansion factor (values: from 1 to 9).
These selections are temporary and are lost when the printer is switched off.
The following table shows the geometrical characteristics of the fonts from 0 to 6 which
are compatible with those available on the ST230 printer (all values are in dots).
GEOMETRICAL CHARACTERISTICS
Font Identifier012356
Font name small normal big symbol
magnu
mmega
Matrix width 8 16 24 32 56 96
Matrix height9 18363270120
Character width 5 10 20 n.a. 39 67
Character height 7 14 28 n.a. 52 72
Default pitch 6 12 24 32 56 96
Default interline1020403270100
These fonts are resident on the ST3xx and ST4xx printers. The ST4xx series also has the
following fonts :
ID Font name interline
A Arial Bold 4 pts 19
B Arial Bold 5 pts 24
C Arial Bold 7 pts 34
D Arial Bold 8 pts 38
E Arial Bold 9 pts 45
F Arial Bold 12 pts 59
G Arial Bold 16 pts 78
H Arial Bold 20 pts 96
I Arial Bold 24 pts 105
J Arial Bold 32 pts 153
K Courier Bold 4 pts 20
L Courier Bold 5 pts 23
M Courier Bold 7 pts 33