Specifications

DATAPROCESS EUROPE S.p.A.
ST3xx ST4xx ST5xx
– PROGRAMMING MANUAL -
Pag.32
17.22 /C
The
/C
command is used to empty the buffer of the printer. All the fields are removed and
the parameters are reset to the following default values:
font = normal
source = EPROM (fixed spacing)
horizontal expansion = 1
vertical expansion = 1
interline = 20
pitch = 12
horizontal position of cursor = 0
vertical position of cursor = 14
rotation = 0
mode = 0 (black)
thickness of barcode = 2
ratio of barcode = 2 (2.5 a 1)
barcode string bar guard = 1 (string present, guard bar absent)
The
/C
command is used before another label is printed.
17.23 /Exxxxyyyy
The
/E
command is used to position the cursor which will be used as the starting point for
the insertion of any object or bitmap.
It must be followed by 2 parameters, each of 4 digits, with the following significance:
xxxx
horizontal position in dots (values: from 0000 to XMAX);
yyyy
vertical position in dots (values: from 0000 to YMAX).
The upper limits XMAX and YMAX mentioned above depend on the size of the bitmap
and the current position.
17.24 /Ffhv
The
/F
command is used to select the font style and the expansion factor.
It must be followed by 3 parameters which identify the desired font and the associated ex-
pansion factor in the following way:
f
identification of font, 1 character
from 0 to 6 ST3xx
from0to 6and from A to T ST4xx ST5xx