Specifications

DATAPROCESS EUROPE S.p.A.
ST3xx ST4xx ST5xx
– PROGRAMMING MANUAL -
Pag.27
17.16 /*Dx solo ST4xx ST5xx
This command is used to choose between single or double application with the AP406 ap-
plicator.
x=0 Double application Left/Right
x=1 Double application Right/Left
x=2 Single application Left
x=3 Single application Right
17.17 /*Txx solo ST4xx ST5xx
The following command sets the delay time before the photo sensors on the applicator
plate are read. The time starts from the moment the label has been printed and is ex-
pressed in seconds.
Example: *T01 means that the label has been printed and that the applicator arm has
started its movement and that the photo sensors on the plate will be read after one second.