Specifications

V140602E iBoot-DC Page 2
2. General Description
The iBoot-DC is a network attached, IP addressed, web controlled DC power switch. Anyone with a web
browser can access iBoot-DC to perform power On, Off or Power Cycle (Reboot or Power Burst). iBoot-
DC uses two levels of password for security.
iBoot-DC is compatible with DC voltages from 5 to 48VDC. Both Positive and Negative DC voltage
sources are supported. A simple Web browser interface makes it easy to control power from anywhere in
the world with a click of a mouse. iBoot-DC also supports Telnet for text commands, as well as
Dataprobe’s Exchange Protocol (DxP) for interfacing to a variety of Dataprobe products and custom
software development.
2.1. Uses for iBoot
• Remote reboot of any device, routers, servers, kiosks, etc. The device to be rebooted need not be
network attached.
• Secure sensitive devices by keeping them powered off when not in use. This prevents hackers from
seeing them at all times.
• Power down equipment when not needed for power savings and to save on wear and tear.
• Power up alert devices like sirens, lamps, messages; or control environmental system like heaters,
coolers pumps, etc.
2.2. Multiple Control Options
In addition to the Web control capabilities, iBoot-DC features several other means to operate automatically
or under computer control.
AutoPing: The AutoPing feature allows iBoot-DC to automatically detect failed equipment and perform a
timed reboot or other power control function (like turning on an indicator or siren). You set 1 or 2 IP
addresses to be periodically pinged. When iBoot-DC no longer detects a response from the address(es),
the programmed power control function is actuated.
Telnet: iBoot’s Command Line Interface (CLI) allows direct control and setup through Telnet.
Dataprobe Exchange Protocol: iBoot-DC supports the Dataprobe Exchange Protocol (DxP) This protocol
allows Dataprobe products to communicate across networks, and allows developers to design custom
applications to integrate iBoot-DC into custom applications. For more information about DxP, contact
Dataprobe Applications Engineering and Support.