Specifications

Page 5
4.3 Mounting Options
iBoot-G2+ is suitable for desktop or shelf mounting. A mounting kit for wall and DIN rail mounting is
also available.
4.4 Initial Configuration
The Device Management Utility (DMU), available online at http://dataprobe.com/support/iboot.html,
provides the easiest means to find and configure your iBoot-G2 for use. It can discover all the
iBoots on your network, display the current IP address of each, and allow setting of any valid IP
address.
Other ways to set the IP Address
1. Automatically from a DHCP Server
1. Web Browser via the Set-up Page
1. CLI (Telnet & USB)
iBoot-G2 comes with factory installed IP address 192.168.1.254.
5 Operation
5.1 Web Browser
Password Protection
iBoot-G2 uses two username/password credential sets, one for normal power control (User) and
one that also provides access to the setup functions (Admin).
Default Credentials:
Role Username (fixed) Password (user set)
Administrator admin admin
User user user
Open your browser and enter the IP address of iBoot-G2 into the address bar. If you have changed
the IP address by any of the methods described, enter that address, otherwise, use the default IP
address 192.168.1.254
Enter the username and password as prompted. When the proper username/password is received
the Control and Status Page is displayed.