Specifications

Page 12
15. Click on the Settings Tab
16. Select ‘Router Mode (Multi User)’
17. Check the box for ‘Auto PDP context Activation’. This will make the terminal start the
Standard connection automatically after you register on the network.
18. Your configuration should look like this
19. Reboot the terminal
20. Restart your terminal, after properly pointing the terminal. The Explorer terminal will register
automatically on the BGAN network you will be connected automatically with a Standard
connection.
7.3 Setting up BGAN – Hughes
The terminal needs to be configured to switch on when external power is connected; no Pointing is
required at power up and to automatically activate a data connection. The BGAN terminal and can
be configured from the Hughes™ HNS9201’s built-in web server (via a PC’s web browser).
1. Open your internet web browser and type the following IP address in the address bar:
192.168.128.100
2. Click on ACA on the menu on the left.
3. Select ACA settings for TEs with Static IP address ‘ON’ for the range of 200 – 209. QoS
select Background. Enter the APN, user name and password provided by your SP in order to
get a Static IP address. NOTE: If no static IP address is used your IP address will change
every time you connect to the BGAN network. On the PDP Contexts screen you can see the
IP address of you connection
4. Click Apply
Your configuration should look like this