Specifications

Page 11
6. Click on the Data Icon
7. Click on Primary Profiles
8. Select the connection Type as Standard
9. Check mark ‘Set as default’
10. APN: APN Select User Defined APN, enter the APN, check Apply user defined APN, enter
the user name and password provided by your SP in order to get a Static IP address. NOTE:
If no static IP address is used your IP address will change every time you connect to the
BGAN network. On the Data Screen Connection Tab you can see the IP address of you
connection.
11. Click ‘Update Settings’
12. Your configuration should look like this
13. Click on Port Forwarding
14. Click Add, Enter the Incoming port 80 destination address the IP you assigned to the PNSC
192.168.1.X, Protocol TCP and the destination port 80. Check Enable and click Apply.