Specifications

Page 8
7 Configuring the BGAN terminal
7.1 Setting up BGAN – Thrane & Thrane EXPLORER 300/500/700
The terminal needs to be configured to switch on when external power is connected; no Pointing is
required at power up and to automatically activate a data connection. The BGAN terminal and can be
configured from the EXPLORER™’s built-in web server (via a laptop’s web browser)
1. Open your internet web browser and type the following IP address in the address bar:
192.168.0.1
2. Click on Settings and then LAN
3. Now you should see the web server interface. The screenshot below shows the settings
required as configured via the EXPLORER™’s web server interface, ensure you click apply
before leave the web page. Please consult your EXPLORER™ manual for more detailed
information.
4. NAT Mode Select Router
5. APN Select User Defined, enter the APN, user name and password provided by your SP in
order to get a Static IP address. NOTE: If no static IP address is used your IP address will
change every time you connect to the BGAN network. On the dashboard screen you can see
the IP address of you connection.
6. Automatic Activation select Enable.
7. Click Apply