Specifications

iPIO-2816_v131004e iPIO-2, iPIO-8, iPIO-16 Users Guide Page 12
SNMP Factory Defaults
Read Community: public
Read/Write Community: private
Notification Timeout: 1 second
Notification Retry Count: 3
Lead Configuration Change: 0 seconds
Download the MIB from the iPIO support pages at http:Dataprobe.com\support.aspx
The iPIO is configurable for what events trigger SNMP Traps. See section 7.5 SNMP Setup
 Input. Email on any input change
 Relay. Email on any relay change
 Communication. Email on any change in communication status to the remotes.
 Configuration. Email on any configuration change.
5.4. Email Notifications
The iPIO will send email for a number of events. Up to two email addresses can be specified to receive
emails. The types of events that generate emails are also configurable. See section 7.3 Email Setup. The
events that can generate emails are:
 Input. Email on any input change
 Relay. Email on any relay change
 Communication. Email on any change in communication status to the remotes.
 Configuration. Email on any configuration change.
Email Syntax for input change
From: <your from account>
Date: Thu, Oct 3, 2013 at 5:14 PM
Subject: Input Change
To: <your to address>
<Location Name of iPIO>
Input <input number> <input name> is <state name>
Example:
From: <[e-mail]>
Date: Thu, Oct 3, 2013 at 5:14 PM
Subject: Input Change
To: [e-mail]
Shop Floor - Houston
Input 16 Back Door is Open
Other emails use similar syntax.