User manual

Section 1
INTRODUCTION
Copyright (C) Dataplex Pty Ltd
1-3
1.4 The DPX-213 Modem
The DPX-213 is designed and built in Australia and offers:
• Low Power: Standby current < 100uA.
Operating current < 100mA
• Wake up on DTE RxD, Ring or Raise of
DTR.
• Led operation link selectable.
• DTR wake-up link selectable.
• Alarm/Dialback function.
• Password security/dialback.
• Remote configuration.
• Async/Sync link selectable.
• Power from DB25, IDC or Power
Connector.
• Small size.
• MNP error correction & data compression.
• Constant speed interface from 300 to 9,600
bps.
• Automatic terminal speed detection from
300 to 9,600 bps.
• Data operation at 300, 1200, and 2400 bps.
• Auto-ranging on originate and answer at
300, 1200 and 2400 bps.
• CCITT standards V.21, V.22, and V.22bis.
• Bell 103 and Bell 212 support.
• A rugged plastic case.
• Front panel indicators.
• Stored number dialling for up to ten
numbers.
• DTR raise and AT command dialling.
• Help screens for configuration, S-registers
and AT prompts.
• Manufactured to ISO-9002/AS-3902 quality
standards.
• Austel approved.
• RFI compliant to AS-3458 and CISPR-22
class A.