Manualshelf

Specifications

ManualsBrandsDataplex ManualsComputer equipmentDPX-213
41424344454647484950
HYDROLOGICAL SERVICES
DL312 100-04 IMP
Issue 2: 15/11/2005
Part No. Description Purpose
DL307 Interrogation lead - DB9 Interrogation lead - logger to PC, DB9 Female
connector
DL308 Interrogation lead - DB25 Interrogation lead - logger to PC, DB25
Female connector
DL309 Lead RRDL3 to Modem Connection lead - logger to modem, DB25
Male connector
3. Software Installation
The software is installed by placing the 3.5” floppy disk in drive A: and moving to the directory
on your hard disk where you require the software to reside.
Type “copy a:\comlog.exe ” and the program will be copied to the hard disk. (Similarly the
software can be copied from the B: drive by typing “copy b:\comlog.exe ”)
4. Starting and Configuring the Software
The software may be run in either a DOS or Windows environment!
To start the software from DOS simply type “comlog ”. The software will initially start with the
default configuration of COM1, 9600 baud, 8 bits, No parity, 1 stop bit and XON/XOFF
handshake. Once the software has been configured and saved, it will start up with the saved
configuration. (The configuration file is called “comlog.cfg”) The configuration file is saved in the
directory where the application is run, therefore you may set up different configurations in
different directories.
To start the software from Windows either double click on the “comlog.exe” file while in file
manager or set up an icon to start the program by using the standard Windows procedure -
consult Windows help.
Once the program has started press F1 for help. The following will be displayed :-
Command Summary ---> Alphanumeric keys for terminal emulation
F1 - Displays this help screen.
F2 - Toggles COM1 or COM2 ports
F3 - Toggles 9600/2400/1200/300 baud rates
F4 - Toggles 8 bits/no parity and 7 bits/even parity
F5 - Toggles Handshake None/XonXoff/Hardware
F6 - Display the present configuration + Log status
F7 - Enable/Disable Logging to a file
F8 - Enable/Disable Logger output in
SPREADSHEET format to file
F10 - Save the present configuration
esc - To exit this program