Specifications

HYDROLOGICAL SERVICES
DL3 100-026 IMP
Issue 2: 15/11/2005
the most recent data is always available. It is advisable that when changing the state of the Memory
Wrap flag, the existing logged data be erased so that logging can start afresh.
On-line Help
MW?
Memory Wrap: Allows rain & river log to wrap around
Erase logged data when changing this flag !
Syntax: MW<R> or MW=ON<CR> or MW=OFF<CR>
4.1.9 Miscellaneous (ID, SI, MO, PASSWD, RESET, VER)
The logger ID is set at time of manufacture and can only be read.
On-line Help
ID?
Logger ID String: Display manufacturer ID with embedded logger serial no.
Syntax: ID<CR> eg. HS0001
The site name variable is used to either identify a specific logger or the location of the logger. The
user can use this field for whatever they wish.
On-line Help
SI?
Site Name: Variable length to 16 chars
(alphanumeric upper & lower case)
Syntax: SI<CR> Displays the site name
SI=Melb<CR> Sets site name
The Mode Rain Only flag is used to select whether the logger is used for logging rainfall only or for
logging rain + river data. (Note the hardware DIP switch 1-6 selects river quadrature or river 4-
20mA transducer)
On-line Help
MO?
Mode Rain Only: Parameter to set ‘Rain Only’ or ‘Rain + River’ modes
Syntax: MO<CR> Displays Mode Rain Only state
MO=ON<CR> Set Rain Only
MO=OFF<CR> Set Rain + River
The password prevents unauthorised access to altering the parameters or clearing the rain and river
logs. Password access is cleared when the logger "Goes to Sleep" either due to the "BYE" command
being entered or the 1 or 5 minute timeout elapsing. New passwords may be entered by first gaining
access, and then entering the password command again with the new password. Note that the
password is upper / lower case sensitive.