Specifications

HYDROLOGICAL SERVICES
DL3 100-02 IMP
Issue 2: 15/11/2005
Table of Contents
Page
1. Introduction DL3 100-04 IMP
2. Product Overview DL3 100-05 IMP
3. Installation DL3 100-06 IMP
3.1. Hardware Connections
3.1.1 Tipping Bucket Raingauge DL3 100-06 IMP
3.1.2 River Sensor DL3 100-07 IMP
3.1.3 Communications DL3 100-08 IMP
3.1.4 DIP Switches DL3 100-09 IMP
3.2. Setup and Configuring the Logger DL3 100-10 IMP
3.2.1 Site Information DL3 100-10 IMP
3.2.2 System Time/Date DL3 100-10 IMP
3.2.3 Rainfall Sensor + Parameters DL3 100-10 IMP
3.2.4 Quadrature River Sensor + Parameters DL3 100-11 IMP
3.2.5 Analog River Sensor 4-20mA + Parameters DL3 100-11 IMP
3.2.6 Communications DL3 100-12 IMP
4. Operation DL3 100-13 IMP
4.1. Commands / Syntax DL3 100-13 IMP
4.1.1 On line help (?) DL3 100-13 IMP
4.1.2 Alarms (AL, CLA, DUA, RALx, RVALx) DL3 100-14 IMP
4.1.3 Battery Voltage (BV) DL3 100-19 IMP
4.1.4 Bye (BYE) DL3 100-19 IMP
4.1.5 Call/Clear Sequence/Numbers (CALLx, CLEARx, CNx) DL3 100-19 IMP
4.1.6 Communications (COM, SEND, EV, RE, RETRY) DL3 100-21 IMP
4.1.7 Date/Time Parameters (D, T, TO) DL3 100-23 IMP
4.1.8 Dump Log (DUR, CLR, DURV, CLRV, LOG) DL3 100-24 IMP
4.1.9 Miscellaneous (ID, SI,MO, PASSWD, RESET, VER) DL3 100-26 IMP
4.1.10 Rain Parameters (RCHID, RI) DL3 100-27 IMP
4.1.11 River Parameters Quad (RVCHID, RVI, RVHR) DL3 100-28 IMP
4.1.12 River Parameters 4-20mA(RVI, RVHR, TXR, TXI) DL3 100-28 IMP
4.1.13 Status (ST, COM, R, RV) DL3 100-30 IMP
4.1.13.1 The Status Window DL3 100-30 IMP
4.1.13.2 The Communications Window DL3 100-32 IMP
4.1.13.3 The Rainfall Message DL3 100-33 IMP
4.1.13.4 The River Height Message DL3 100-34 IMP
4.1.13.5 Water level (WL) DL3 100-35 IMP
4.2. Data Output Format DL3 100-35 IMP
4.2.1 Rainfall Record DL3 100-35 IMP
4.2.2 River Height Record DL3 100-36 IMP