Specifications

HYDROLOGICAL SERVICES
DL3 100-013 IMP
Issue 2: 15/11/2005
4. Operation
4.1 Commands / Syntax
Each of the logger commands that follow are described in detail and include the exact On-line Help
information that is provided in the RRDL-3 logger by entering Comnd?
4.1.1 On-line Help (?)
A list of all logger commands and abbreviated syntax is given when ? is sent to the logger. For
more information on any specific command enter Comnd?
On-line Help
?
Data Logger Command Syntax
====================== [...]= optional toset
parameter
(Command may be upper and/or lower case) <CR> = press carriage return
AL[=on/off]<CR> (en/disable Alarms) BV<CR> (Batt. Voltage)
BYE<CR> (Go to Sleep) CALLx[=30char]<CR> (Call Seq. x=1,2,3,4)
CLA<CR> (CLear Alarm log) CLEARx[=30chr]<CR> (Clear Psychs=1,2,3,4)
CLA<CR> (Clear Rain log) CLRV<CR> (CLear RiVer log)
CNx[=12 dig]<CR> (Call No x=1,2,3) COM<CR> (COMms window)
D[=mm/dd/yy]<CR> (Date) DUA<CR> (DUmp Alarm log)
DUR[...]<CR> (DUmp Rain log) DURV[...]<CR> (DUmp RiVer log)
EV[=On/Off]<CR> (EVent output) ID<CR> (logger ID)
LOG[=On/Off]<CR> (En/Disable Log) MO[=On/Off]<CR> (Mode rain Only)
MW[=On/Off]<CR> (Memory Wrap) PASSWD=****<CR> (4 char password)
PASSWD=****<CR> (4 char password) R<CR> (Rainfall request)
RALx[=...]<CR> (Rain ALarm x=1,2,3) RE[=On/Off]<CR> (REsponse output)
RESET<CR> (software RESET) RETRY[=1 dig]<CR> (comms RETRY cnt)
RCHID[=7 dig]<CR> (Rainfall CH ID) RI[=x.x/mm]<CR> (Rainfall Inc.)
RV<CR> (River request) RVALx[=...]<CR> (RiV. ALarm x=1,2,3)
RVCHID[=7 dig]<CR> (RiVer CH ID) RVHR[=xx.xxx]<CR> (RiV. Height Ref(m))
RVI[=xx/mm]<CR> (RiVer lvl Inc) SEND[=hh/m/tt]<CR> (mesg SEND schedule)
SI[=16chars]<CR> (SIte name) ST<CR> (STatus window)
T[=hh:mm:ss]<CR> (Time) TO[=hh:mm]<CR> (Time Offset)
TXI[=mm/s]<CR> (Trans Interval) TXR[=xx.x]<CR> (Trans 20mA depth)
VER<CR> (S/W Version)
FOR MORE INFO TYPE COMND?<CR> (or call Hydrological Services on 61-29-601-2022)