Specifications

Engineering Standard –NSW
Signalling SMS 02
Cerberus Level Crossing Monitor Equipment
March 2005 Version 1.2 © Australian Rail Track Corporation Page 63 of 118
This document is uncontrolled when printed.
3 - Get modem string
4 - Get serial port config
5 - Get status times
6 - Reset fault
7 - Reset monitor
8 - Set date/time
9 - Set name
a - Set phone numbers
b - Set pin's
c - Set serial port config
d - Set modem string
e - Test monitor
q - Return to main menu
-- Log /IO menu ---
1 - Log to screen
2 - Log to disk
3 - View log from disk
4 - Clear log
5 - Show IO names
6 - Get IO states
q - return to main menu
--Test level crossing ---
--Send Config data---
--Get Config data---
4.1.4.3 Using the Windows Program CERBERUS
Details on using the CERBERUS program are given in it’s user
manual and are not repeated here. The connection between the PC
and the level crossing monitor uses the same null modem serial cable
as described in the section below on Tools and Maintenance.