Specifications

Engineering Standard –NSW
Signalling SMS 02
Cerberus Level Crossing Monitor Equipment
March 2005 Version 1.2 © Australian Rail Track Corporation Page 62 of 118
This document is uncontrolled when printed.
Menus available
 -- Main menu ---
1 - Connect menu
2 - Lamp setup menu
3 - Log / IO menu
4 - Maintenance menu
5 - Test level crossing
6 - Send Config data
7 - Get Config
data q - quit
 -- Connect menu ---
1 - Set serial port config
2 - Dial crossing
3 - Establish connection
4 - Accept Status change
5 - Hang up
q - return to main menu
 -- Lamp setup menu ---
1 - Do lamp learn
2 - Get lamp diagnostics
3 - Get lamp offsets
4 - Set battery offset
5 - Set lamp offsets
6 - Abort
7 - Pause
8 - Resume
q - Return to main menu
 -- Maintenance menu ---
1 - Enable reporting
2 - Get id & status