Specifications

Engineering Standard –NSW
Signalling SMS 02
Cerberus Level Crossing Monitor Equipment
March 2005 Version 1.2 © Australian Rail Track Corporation Page 61 of 118
This document is uncontrolled when printed.
Screen Layout for LX_MAINT.
RSA Level Crossing Monitor ¦
Maintenance Terminal V1.14 ¦
-------------------------------¦
¦
-- Main menu --- ¦
¦
1 - Connect menu ¦
2 - Lamp setup menu ¦
3 - Log / IO menu ¦
4 - Maintenance menu ¦
5 - Test level crossing ¦
6 - Send Config data ¦
7 - Get Config data ¦
¦
q - quit ¦
¦
¦
¦
¦
-------------------------- ¦
000 Unknown ¦
NORMAL ¦
¦
-------------------------------------------------------------
Select option :_
The screen is divided into 5 sections. These are:
 Top left is the program title and version number. You should have
version 1.6 or later.
 The second top left is the menu area. The current menu or set of
choices is displayed in this area.
 The third top left identifies the name and status of the Level
Crossing monitor to which you have currently established a
connection. UNKNOWN is displayed if a connection has not been
established.
 The bottom line is the selection and prompt line. Normally what you
type appears on this line.
 The right hand side displays error messages and information
retrieved from the Level Crossing Monitor to which a connection is
currently established.