Specifications

Engineering Standard –NSW
Signalling SMS 02
Cerberus Level Crossing Monitor Equipment
March 2005 Version 1.2 © Australian Rail Track Corporation Page 2 of 118
This document is uncontrolled when printed.
Disclaimer
Australian Rail Track Corporation has used its best endeavors to ensure that the content,
layout and text of this document is accurate, complete and suitable for its stated purpose. It
makes no warranties, express or implied, that compliance with the contents of this document
shall be sufficient to ensure safe systems of work or operation. Australian Rail Track
Corporation will not be liable to pay compensation in respect of the content or subsequent
use of this document for any other purpose than its stated purpose or for any purpose other
than that for which it was prepared except where it can be shown to have acted in bad faith
or there has been willful default.
Document Approval
The technical content of this document has been approved by the relevant ARTC
engineering authority and has also been endorsed by the ARTC Safety Committee.
Document Supply and Control
The Primary Version of this document is the electronic version that is available and
accessible on the Australian Rail Track Corporation Internet and Intranet website.
It is the document user’s sole responsibility to ensure that copies are checked for currency
against the Primary Version prior to its use.
Copyright
The information in this document is Copyright protected. Apart from the reproduction without
alteration of this document for personal use, non-profit purposes or for any fair dealing as
permitted under the Copyright Act 1968, no part of this document may be reproduced,
altered, stored or transmitted by any person without the prior written consent of ARTC.