Specifications

RailCorp Engineering Manual — Signals — Equipment Manual

Cerberus Level Crossing Monitor Field Equipment Manual TMG E1261

Issued August 2012 UNCONTROLLED WHEN PRINTED Version 2.1

5 - Get status times

6 - Reset fault

7 - Reset monitor

8 - Set date/time

9 - Set name

a - Set phone numbers

b - Set pin's

c - Set serial port config

d - Set modem string

e - Test monitor

q - Return to main menu

--- Log /IO menu ---

1 - Log to screen

2 - Log to disk

3 - View log from disk

4 - Clear log

5 - Show IO names

6 - Get IO states

q - return to main menu

---Test level crossing ---

---Send Config data---

---Get Config data---

3.1.4.3 Using the Windows Program CERBERUS

Details on using the CERBERUS program are given in it’s user manual and are not

repeated here. The connection between the PC and the level crossing monitor uses the

same null modem serial cable as described in the section below on Tools and

Maintenance.

Some facilities are protected by PIN numbers. These are:

• Engineering Mode access PIN number

• Remote Control Centre connection PIN number