User Manual

ImageDP4+



data walls, signage or display wall applications.

• Gen 2, x16 lane PCI express graphics card

• 

• Low power

• High Performance 2D and 3D graphics

• 

• Support for Windows® 10 and Windows® 7

• RGB, SD and HD video window support by adding the Datapath Vision range of capture cards.

• HDCP is supported with Datapath capture cards

• 



Installation

This section deals with installing ImageDP4+ cards and spreading the Windows desktop across all the screens. If you are

intending to use the ImageDP4+ cards with other Datapath products, you should follow this section to get the Windows



System Requirements

• 

• 

• Support for Windows® 10 or Windows 7®

Unpacking

Your packing box should contain the following items:

• The ImageDP4+ PCIe plug-in card.

• 

• 

• 

It is recommended that all ImageDP4+ cards and any Vision cards are installed in the system prior to installing the drivers.

Otherwise as cards are installed the drivers may need to be reinstalled as the card’s PCI bus numbers change.

Note:

All plug-in cards are static sensitive and packed in antistatic materials. Please keep the card in its packaging until you are

ready to install.

It is recommended that you do not discard the packing box until you are completely satised with the ImageDP4+ card,

and it is fully installed and working correctly. We also recommend that you make note of the serial number of the card in a

prominent place before you plug the card into the computer. This should hasten any query should you need to contact our

Technical Support Department. The serial number is displayed on the card and the box label.

• -

puter, noting the positions for accurate reconnection. Remove the PC cover.

• Locate a vacant PCIe slot for the ImageDP4+ on the motherboard and remove the backing plate (retain all screws).

• 

securing the card into the slot as some motherboards may have components that impede the siting of the card.

Screw the card bracket to the back panel of the PC and replace the cover.

Connect screens to all the outputs from the card. If there are other graphics devices in the system, connect screens to them



Switch all the screens on then switch the machine on. You should see the boot messages on one of the screens. The screen on

-

trol which of the ImageDP4+ outputs the system will boot on.