Specifications

Options/Accessories

The Compact4 printers have several options available to help meet your specific requirements and

enhance your printing experience. Refer to the subsequent pages for availability and compatibility.

Tower Kit

Unlike any other printer in the industry, the Compact4 printers can be stacked

using the tower rack accessory. The rack is designed to maintain the footprint

occupied by a single printer while allowing easy loading and printing operations.

Wall Mounting Kit

The wall mounting kit allows the printer to be wall mounted quickly and easily. It

is ideal in applications where counter space is limited and the printer is in close

proximity.

Label Taken Sensor Kit

The label taken sensor, also know as LTS, is commonly used with the peeler kit.

A photo cell is mounted facing upward at the label exit to detect when the label is

taken. The photo cell controls the printing pace so that the next label is printed

only after the previous label has been removed.

Peeler Kit

The peeler kit automatically separates the label from the label liner (backing) by

pulling the liner over a sharp edge and winding it onto a three pronged spindle.

This allows the user to take a printed label directly from the printer and apply it.

A peeler kit along with a label taken sensor kit automates applying labels by

removing the label liner and pausing printing until the label is taken.

Large Roll Kit

The large roll kit allows the printer to handle a larger roll loaded onto its spindle

which increases the roll diameter capacity from 3.9”( 100mm) to 5.9” (150mm).

The kit requires removing the old spindle and installing a new spindle that

displaces the roll further from the printer.

MP Series: Compact4 & Compact4 Mobile