Product guide

M-Class Mark II
13
Options and Benefits:
Thermal Transfer
A printing method that uses ribbon to produce
exceptional image clarity, as compared to most
direct thermal media types. The 4 section
split-hub design allows for lower torque on
narrow ribbons. This option can be used with
either coated-side-in ribbons or coated-side-out
ribbons.
Present Sensor
An output control device that allows subsequent
printing to occur only after the removal of a
previously printed label.
Peel & Present
An internally “overdriven” design for heavy
duty requirements using aggressive adhesive or
polyester type media. Minimum label length is
1.5 inches (38mm).
Cutter
Plug and Play. Attach the option and it is auto
detected during power up. The cutter is a rotary
type mechanism capable of cutting media
from .0025" to .0100" (.0635mm - .254mm)
thick, and the cutter life is designed to exceed
500,000 cuts.
Internal Rewind
A heavy-duty label rewind option to tightly
rewind a partial 5.5" roll of labels and backing
onto a 3" diameter core.
External Rewinder
The external rewinder (up to 4.5" wide and
8" OD roll) is used for rewinding labels onto a
roll as they are printed. This allows for batch
printing large continuous rolls of labels or tags
and distributed for use.
Field Installable RFID
RFID Field upgradeable kits for UHF and
HF are available that makes it easy for
customers to upgrade the systems to RFID
in present installations.
In addition to the above options, we offer the following optional communications ports:
The internal LAN (Ethernet) port allows for network connectivity, sharing and management. LAN connectivity
provides more efficient use of the printer.
The wireless LAN option has the same benefits as the LAN port with the additional benefit of not requiring a
wired connection which allows for mobility and eliminates investing in network wiring expansion.
Hardware and Software Options