Product guide

www.datamax-oneil.com
30
Windows Drivers
The I-Class Mark II has drivers for use on the latest Windows operating systems. The drivers allow the user to
view and change printer settings from any Windows software application, simplifying the print process. Windows
drivers are available on the CD included with the printer or can be downloaded at www.datamax-oneil.com.
NETira CT
NETira Configuration Tool is part of the Datamax-O’Neil suite of applications. It is a Windows based software
application that allows easy access and setup of the I-Class Mark II printer. It can be used with any
communication port available on your printer and allows you to store settings to be applied to a different printer.
This is ideal when you are replacing or adding printers to your application.
Embedded Browser Configurator
The I-Class Mark II has a resident web page embedded into the firmware that is accessible via a web browser.
The web page allows full access to the printer’s settings and allows complete configuration. Accessing the
printer via the Embedded Browser Configurator is easy: simply connect the printer to the network, start the
browser program, and enter the printer’s IP address. The resident web page will pop up and printer is up and
running without needing to install software or a specific operating system.
Software Uses
Media Handling/Capacity NETira CT Windows Drivers
Embedded
Configurator
Printer Setup/Configuration
Performance Settings
X X X
Media Handling Settings
X X X
Change/Store Settings
X X X
Recall File/Load Settings
X
Configure Options
X X X
Required for Windows Applications
X
Operating System Compatibility
Windows 2000, XP, Vista
X X X
Linux
X
MAC
X
Unix
X
Communication Port Compatibility
USB
X X
Serial
X X
Parallel
X X
Ethernet
X X X
Software