Product guide
www.datamax-oneil.com
14
Options and Benefits
Thermal Transfer
A printing method that uses ribbon to produce exceptional image clarity, as compared to most
direct thermal media types. The 4 section split-hub design allows for lower torque on narrow
ribbons. This option can be used with either coated-side-in ribbons or coated-side-out ribbons.
Present Sensor
An output control device that allows subsequent printing to occur only after the removal of a
previously printed label.
Peel & Present
Aninternally“overdriven”designforheavydutyrequirementsusingaggressiveadhesiveor
polyester type media. Minimum label length is 1.5 inches (38mm).
Cutter
Plug and Play. Attach the option and it is auto detected during power up. The cutter is a rotary
type mechanism capable of cutting media from .0025" to .0100" (.0635mm - .254mm) thick,
and the cutter life is designed to exceed 500,000 cuts.
Internal Rewind
A heavy-duty label rewind option to tightly rewind a partial 5.5" roll of labels and backing onto
a 3" diameter core.
External Rewinder
The external rewinder (up to 4.5" wide and 8" OD roll) is used for rewinding labels onto a roll
as they are printed. This allows for batch printing large continuous rolls of labels or tags and
distributed for use.
In addition to the above field installable options, I-Class Mark II is offers the above mentioned LAN, W-LAN, 2
USB Host Ports & SDIO as options that can be installed in the field by certified technicians.