Operator`s manual

H-Class 129
Thermal Transfer
Consider three important factors when selecting thermal transfer media and ribbon
combinations:
• Label top coating and ribbon combinations may affect image quality;
• Ribbon backcoating can provide printhead protection and, depending upon the
formula, help reduce static build-up; and,
• The ribbon width, when slightly wider than the media, can also guard the printhead
against media abrasion.
Media and Ribbon Selection
To achieve optimum print quality and maximum printhead life, we specify the use of
DATAMAX

brand media. These supplies are specially formulated for use in our printers;
use of non-Datamax supplies may affect the print quality, performance, and life of the
printer or its components. For a current list of approved media, please contact a Media
Representative at [phone].
Suggested direct thermal and thermal transfer applications are listed below:
Media and Ribbon Overview
Direct Thermal Media
Print
Speed*
Print
Energy
Image
Durability
Datamax DTL-HSM 10 – 12** Medium Low
Datamax DTL-HSH 10 – 12** Medium Low
Thermal Transfer Media
Ribbon
Type
Print
Speed*
Print
Energy
Image
Durability
Great Label TTL GPR Plus 10 – 12** Medium Medium
Coated and uncoated paper, tag
stock, some films and synthetics
Wax
GPRPlus
2 – 10 Low Low
Coated and glossy paper, tag
stock, some films and synthetics
Wax/Resin
PGR+
2 – 8 Medium High
Synthetics and films Resin SDR 4 – 6 High High
* Given in inches per second.
** Highly recommended for optimum quality at speeds above 10 IPS.