Specifications

Printhead Cleaning Procedures
Datamax encourages a scheduled cleaning of the printhead. This will give the user optimum performance
and quality from their H-Class printer and provide maximum life of the printhead.
Datamax offers three easy methods to clean the printhead:
(Please refer to the H-Class users manual for detailed instructions on cleaning the printhead).
1) Cotton Swab Procedure
a. Use for direct thermal media, thermal transfer media and wax ribbon
b. Use a moistened cotton swab with isopropyl alcohol and gently clean the entire printhead surface
2) Cleaning Card Procedure
a. For printers using direct thermal media, or thermal transfer media and wax ribbon
b. Place a cleaning card (P/N 70-2013-01 for 4" model printer) under the printhead. Close and lock
latch and disengage the leveling cam.
c. Close the cover then press and hold the TEST Button to initiate cleaning
3) Cleaning Film Procedure
a. For printers using thermal transfer media and a resin ribbon or for printers that typically use a
heat value of 22 or higher
b. Place a sheet of cleaning film (P/N 70-2087-01 for 4" model printer) under the printhead. Close
and lock the printhead latch and disengage the leveling cam.
c. Close the cover then press and hold the TEST Button to initiate cleaning.
HClass
29
Contact ADC Nordic AB - [phone] to find out prices and deliverytime.