Specifications

Printer Specifications
H4212X and H4310X
Standard Features
· Thermal transfer and direct thermal printing of bar codes, text,
and graphics on demand and batch printing
· Thin film printhead with IntelliSEAQ™ (Sequential Energy
Adjustment for Quality)
· Die-cast aluminum frame
· Datamax Programming Language (DPL)
· 32bit multitasking 200Mhz DragonBall® Processor
· 16 MB RAM memory
· 8 MB Flash downloadable program memory (firmware)
· Serial RS-232 port, Parallel, USB, Ethernet Interfaces
· IEEE 1284 compliant bi-directional parallel port
· Gap, notch and reflective top of form media sensing
· 5 button 240 x 320 LCD Graphical back-lit LCD display
· Configuration settings via front LCD panel menu,
· No dipswitches.
· Menus in English, French, Italian, German and Spanish
· Configuration label makes set-up easy to understand
· Simple ribbon and media loading
· Rotating media hub for 3.0" supply rolls
· Clear window in media cover -- easy to view supplies.
· Media tear bar
· Fan-fold media handling from bottom or rear of printer
· AGFA font engine with CG Triumvirate™ Scalable font
· Datamax printer driver for Windows 98 and above desktop
operating systems
· 2 USB front panel connectors
· SDIO support up to 2GB
· Ethernet Connectivity
Printing Specifications
· 203 dpi print resolution (8 dots/mm);
H-4212X
300 dpi print resolution (12 dots/mm); H4310X
· Nominal Printhead Dot Size:
.0043" (.11mm) W x .0052" (.13mm) L; H-4212X
.0027" (.07mm) W x .0043" (.11mm) L; H-4310X
· Print Speeds:
Programmable from 2" (51mm)/sec through 12" (305mm)/sec
in ½" (12mm) increments;
H-4212X
Programmable from 2" (51mm)/sec through 10" (254mm)/sec
in ½" (12mm) increments; H-4310X
· Print length range: .25" to 99.99" programmable
Media Specifications
· Maximum print width: 4.10" (104mm)
· Maximum label length: 99.99" (2.54m)
· Maximum media width (label plus liner): 4.65" (118mm)
· Media Width Range: 1" (25mm) to 4.65" (118mm)
· Media Core ID Range: 1.5" (38mm) - 3.0" (76.2mm)
· Minimum label length:
Tear off mode: .25" (6.35mm)
Peel mode: 1.00 (25mm)
Rewind mode: .25" (6.35mm)
Cutter mode: 1.00 (25mm)
· Media thickness (label & liner): .0025" to .010" (.06mm to .25mm)
· Maximum full-width media thickness for cutter: .010" (.25mm)· ·
· Maximum media roll size: 8.0" (203mm)
· Fan fold media: loads through rear or bottom of printer
· Gap and notch sensing standards:
Gap between labels: 2mm minimum
Sensing notch: .20" (5.1mm) W x .12" (3mm) L
Sensing hole: 0.08" (2.0mm) diameter
Black Mark on back of label: minimum length of 2mm (0.08") long
and 12mm (.047”) wide.
Ribbon Specifications
· Ribbon width range: 1" (25m) to 4.5" (114mm)
· Standard ribbon lengths: 300m (984'), 450m (1476') and 600m (1969')
· Standard ribbon wound coated side in and ribbons wound
coated side out.
Communications Specifications
· One EIA RS-232/DB-25 serial connector. 2400, 4800, 9600,
19.2K and 38.4K baud supported.
· One IEEE 1284 Compliant Parallel interface port
· One internal connector for use with an external media cutter
and present sensor
· SNMP Internal Ethernet Adapter supporting 10/100 mbps
transfer rate with 10-Base-T connector
· USB interface
Internal Font Sets
· Nine Bit-Mapped Fonts, rotatable 0, 90 180, 270 degrees
· CG-Triumvirate™ Scalable Font
· CG Triumvirate™ Condensed Bold Scalable Font
Specifications are provided for reference and are based on printer tests using Datamax brand ribbons and labels. Results may vary in actual
application settings or when using other than recommended supplies. Specifications to change without notice.
HClass
27
Contact ADC Nordic AB - [phone] to find out prices and deliverytime.