Specifications

Long Form
The long form is available for viewing from the
"Datamax Printer Configuration Utility" by placing the
mouse over the PH control button and pressing
"Shift, Alt, D". The reseller should only use the long
form. It is designed to obtain additional information
about the printhead and environment. It is an
additional touch point for resellers to support end
customers. This form is only available on printers
supporting the IntelliSEAQ
™
printhead.
The long form includes:
Manufacturer Characteristics:
Revision Number: The number associated with the printhead
control data stored in the printhead
Model Number: The unique number assigned to the printhead
that defines its mechanical and electrical makeup
Printhead S/N: The serial number from the printhead label
Printer S/N: The serial number from the printer that the
printhead was installed or configured on
The following characteristics are preset by Datamax and are used by
Datamax only...
Print Speed Max: Resistance Value:
Thermistor Reading Max: Operating Strobe Max:
Voltage Max: Strobe Enable Mask:
Compensations:
Installation Data:
Printer ID: An unique number that identifies each Datamax printer
Firmware Version: Current printer firmware that the printhead is currently installed in
Date: Date the printhead was installed into the printer
24Volt A/D/ Reading: Voltage reading at time printhead was installed
Dot Check Data:
Avg. Resistance: Average resistance of all the printhead elements
Failed Dots: Number of elements whose resistance falls outside the expected range
Number of Inches: Number of inches at time last dot check was performed
Head Cleaning:
Clean Schedule: The cleaning schedule of the printer that the printhead is currently running in
Clean Procedures: The number of printer "Clean Head Now" procedures executed on the printhead
Clean Counter Resets: The number of times the clean counter was reset while the printhead was in the printer
Number of Inches: The number of inches printed at the time the counter was reset or the "clean head" procedure was executed
including "clean head" procedures executed
Operational Accumulative Totals:
Revision Number: The number associated with the operational data stored in the printhead
Number of Installations: Number of changes in the printer detected
Number of Inches: Total number of inches of media printed that has traveled under the printhead
Number of Printed Inches: Total number of inches of media printed that has traveled under the printhead for both thermal transfer
and direct thermal operations.
Longest Strobe: Longest strobe that was ever applied to any one of the printhead elements
Max Heat: Highest number of additional heating units applied at one time.
Avg. Heat/Label: Average of additional heating units applied
Max Printhead Temperature: Highest reading of the printhead thermistor recorded
Avg. Printhead Temperature: Average reading of the printhead thermistor
HClass
14
Contact ADC Nordic AB - [phone] to find out prices and deliverytime.