Product guide

www.datamax-oneil.com
26
To achieve optimum print quality and maximum printhead life,
Datamax-O’Neil specifies the use of certified labels and ribbons.
These supplies are specifically formulated for use in our printers;
use of non-Datamax-O’Neil supplies may affect the print quality,
performance, and life of the printer or its components.
[1]
Units of measure are in inches.
[2]
The reflective (black) mark must be carbon based, placed on the backside of the stock, and the reflectance
shall be less than 10% at wavelengths of 950 and 640 nm.
[3]
The label length may vary up to 99 inches with printable area not exceeding the maximum label length.
[4]
This distance is inclusive of the minimum gap between labels. Min length of 1.25 inches (31.8mm) with
optional Cutter installed.
[5]
This distance is inclusive of the minimum reflective mark.
[6]
0.007 inches (.117 mm) w/ Standard Cutter, .005 inches (.127 mm) w/ LD Cutter
Designator Description Min [1] Max [1]
A
Label width 1.00 4.09
B
Backing width 1.00 4.30
C
Gap between labels 0.10 0.25
D
Label length 0.375
[4]
24
[3]
E
Total thickness 0.0025 0.010
[6]
F
Notch opening width 0.20 0.50
G
Distance from the edge of the
media to the media sensor
aperture (left justified)
0.125 0.175
with the Adjustable Media
Sensor option
0.125 2.94
H
Reflective mark width
[2]
0.50 4.10
I
Distance between reflective
marks
0.375
[5]
24
[3]
J
Reflective mark length 0.10 0.25
Certied Supplies